Menu

How to change the screen

1. Loosen the ring screws first, remove the upper frame, remove the damaged fine mesh, and replace it with a new fine mesh.

Steps for changing net

2. Lay the fine mesh on the main screen of the vibrating screen, put the upper frame back to its original position, and tighten the fine mesh by hand around it. Using a pair of pliers, clamp the upper frame to the lower frame. Cut off the rest of the screen, fold the edge of the screen inward, and tighten the nut.

3. Cut off all the fine meshes around the vibrating screen protruding from the frame edge except for the reserved two centimeters.

4. Put the ring back on, loosen the pliers, and fasten the screw of the ring.

5. Use a soft hammer to strike evenly around the bundle ring, then lock the copper nut, and the fine mesh is replaced. If the main mesh frame and the moving plate are removed during the process of changing the screen of the vibrating screen, it is necessary to pay attention to the fact that the moving orifice plate must be firmly embedded in the flange on the bottom surface of the mesh frame when reinstalling.

Technical parameter table：