![](../upload/201704/YA_Circular_Vibrating_Screen_(2).jpg)
![](../upload/201704/YA-circular-vibrating-screen.jpg)
Horizontal Vibrating Screen
Type: Horizontal Vibrating Screen
Capacity: 70-1400t/h
Application: Metallurgical beneficiation, coal preparation, building materials grading, etc.
1. Horizontal Vibrating Screen trajectory is round, the vibrating screen using an ordinary motor to drive the exciter, so that the screen body along the direction of exciting force for periodic reciprocating vibration, material on the screen surface for continuous circular motion, so as to achieve the purpose of screening.
2. Horizontal Vibrating Screen is composed of vibration source, sieve body, sieve mesh, damping device and bottom bracket. Screen machine side plate made of high quality steel, side panels and beams, exciter base with high strength bolts or ring groove rivet connection, sturdy and durable.
3. Adopt eccentric shaft plus eccentric block exciter, high-performance gear transmission system, low stress damping spring, Super heavy duty large clearance bearing, thin oil lubrication and other advanced technology, has the advantages of high sieve frame structure strength and reasonable mechanical structure.
4. Exciter is installed on the screen box, and by the motor through v-belt drive, generate centrifugal force, forced sieve box vibrating.
Use and maintenance:
A. screen machine before the start, should check whether the fastening bolts loose, if loose should be tightened again.
B. the screening machine no-load running time is 4-6 hours, required sieve body smooth, no yaw and abnormal sound, the vibration of bearing temperature is less than or equal to 75℃.
C. idle running, should be a re tighten the screw bolt.
D. after normal operation, regularly check the fastening bolts.
E. often check the vulnerable parts, to be damaged or lost elasticity of the spring to be replaced in a timely manner. The screen occurred fracture or wear, should be timely to tighten or replacement. The source of adjustment, use and maintenance manual please refer to source. (vibration motor using 3 months after refueling time, exciter refueling once half a month, a year of repair, overhaul).
F. parking should be stopped before feeding, to be screened after the end of the material to stop.
Please Feel free to give your inquiry in the form below. We will reply you in 24 hours.